I love heights- hills, mountains, skywalks, skyscrapers and so on. I feel closer to the clouds. My heart feels lighter when I am at a height. This is where my love for travelling started. I have travelled various places but I love those where either there are mountains, hills or skyscrapers. I have read various books about them as they intrigue me the most. Also, I take immense interest in seeing my brother work. He is a civil engineer. So, whenever he gets a skyscraper work, I try following the process. Seeing him work, my curiosity grew. I started researching more about the skyscrapers and gradually acquiring much knowledge about them. Last week, I heard my brother discussing on painting a skyscraper. Hearing the discussion, a thought kept ringing in my mind. I wondered if the cost of painting had a relationship with the structure of the skyscraper.

&nbsp;

Till then whatever my questions were, I would research and find the answers to all my doubts but this was the first time I could not manage to get the answer to my question. I looked for all sources available, but in vain. As a result, I decided to find it out myself.

&nbsp;

This IA is about the same. In this IA, I have tried to derive the relationship between the cost of painting the outer surface of a building and the shape of the building.

This IA aims at discovering the optimal shape of a conventional skyscraper, considering the holding capacity or the number of individuals it may accommodate and height be comparable, such that the cost of painting, polishing or cleaning the outer wall be minimum.

&nbsp;

We would be obtaining the desired results through the use of concepts like calculus and integration for the calculations of surface areas. This will enable us to determine the optimal shapes and designs of skyscrapers to be constructed in the future as per our requirements.

What should be the optimized shape of skyscrapers considering the cost of cleaning the outer wall be minimum?

Skyscrapers are marvels of architecture. Standing tall in the midst of the cityscape, they not only prove the limits of modern technologies but also set outstanding examples for further improvement. Once constructed, the large amount of money spent in erecting the structure, gets further increased when the cost of maintenance is added periodically. Although the internal buildup of these skyscrapers entails regular and invariant costs, the surface on the outside can considerably reduce the cost of cleaning these surfaces.

&nbsp;

In this IA I have started by finding the various surface areas of some differently shaped, notable skyscrapers of tentatively equal height and capacity such that the volume or internal capacity of the skyscrapers remains the same. I have worked on four such skyscrapers and using the Desmos software, I have found out the equations for the curve of the surfaces of these skyscrapers. Finally, by integrating these equations using appropriate limits, I have been able to find out the areas under the graphs and by summing up the sectional areas, I have been able to find the total surface area of the chosen buildings. With this data, I have determined the optimal shape of a skyscraper such that it will have a minimal surface area facilitating the reduction in the cost of cleaning. This result will be beneficial to many in the future so that stable skyscrapers can be built while ensuring minimum cost of cleaning or polishing the outer surface.

While a skyscraper is defined as any building over 40 floors or over 150m, currently the term is clearly used to define high-rises of over 100 floors having a height of several hundreds of meters. Although the shape and size of skyscrapers vary considerably, points like stability, resistance to strong winds or earthquakes, and durability form the basis of any high-rise structure. Moreover, every skyscraper is decided to have such a shape that will help it maintain these points so choosing the shape that will minimize cost of cleaning can be done by finding the shape with minimum surface area.

skyscraper.svg

Several of these supertall structures have already been erected along with 132 in construction currently. In this IA, I have taken the following skyscrapers and calculated their surface areas:

<ul>
	<li>The John Hancock Center:</li>
</ul>

It is a 100 story, 1128 ft tall building situated at 875 North Michigan Avenue, Chicago. Its name was changed to 875 N. Michigan Ave. on 12th February 2018.

<ul>
	<li>The Jin Mao Tower:</li>
</ul>

It is an 88 story, 420.5 metres tall landmark building in Shanghai. It contains shopping malls, offices and the Hyatt Shanghai Hotel, which at the time of completion was the highest hotel in the world.

<ul>
	<li>The Shanghai World Financial Center:</li>
</ul>

It is a 101 story, 494m tall skyscraper situated at 100 Century Ave Lu Jia Zui, Pudong, Shanghai, China. It is the second tallest skyscraper in the city.

<ul>
	<li>The Ping&rsquo;an International Financial Center:</li>
</ul>

It is a 115 story 599m tall in Futian District, Shenzen, Guangdong, China. The Ping An Insurance commissioned the building and the American firm Kohn Pedersen Fox Associates designed it.

<ul>
	<li>The One World Trade Center:</li>
</ul>

It is a 94 story, 1776ft tall skyscraper situated at 285 Fulton St, New York United States. It was built in the place of the Twin Towers which were destroyed during the 9/11 attack.

Group 2.svg

I have used the formula of surface area of cylindrical bodies despite there are two buildings which are not cylindrical in shape. This is because of a certain reason which I have explained below:

&nbsp;

Firstly, In this IA, two skyscrapers are cuboidal in shape and the other two are having an irregular shape. These two buildings which are having an irregularly shaped outer surface are having an approximately circular base. Moreover, most of the region of the outer surface is curved in nature. Thus, unlike simple formula of surface area of cuboid, it is not possible to simply multiply the dimensions of each face of the skyscraper to find the surface area. Rather, tracing the curve is necessary due to the irregularity in finding the surface area. If surface area of two buildings are found using the formula of surface area of cylinder, it is necessary to find the surface area of the other two buildings using the same formula to maintain a uniformity in the magnitude of the values. Secondly, as there is no comprehensive data on dimension of every edge, face, curve, corner etc. of the buildings, it is mandatory to make certain assumptions. In this IA, we have considered the buildings to be cylindrical in shape to nullify the error to the maximum extent as the two major buildings are curve&nbsp;shaped. On the other hand, any building is not perfectly cuboid due to manufacturing of sharp edges in case of high-rise towers is not possible. Thirdly, in case of any optimization study, the trendline of the dependent variable is more important than the exact magnitude of the dependent variable. This is because with a change in procedure of determination of surface area, there will be difference in errors but that will be proportional as well which will not affect the nature of the graph or trendline of the dependent variable, which is, in this case, the outer surface area of the skyscrapers.

In this IA, I am going to calculate the total surface areas of each of the above-mentioned skyscrapers. To achieve this, I have placed the image of the Skyscrapers in the Desmos web application to obtain curves of the surfaces of the buildings using Hit and Trial Method. It is apparent that since the surfaces are uneven, we have to consider separate curve equations and integrate them by using proper limits. At the end we compare the summation of partial surface areas calculated by integration and find out the minimum surface area.

john hancock.svg

From the graph we observe that the equation for the curve within the above-mentioned limits, i.e., from x = 0 to x = 0.1

&nbsp;

y = 0x + 0.85

&nbsp;

We can say that y = f(x) so we use the formula for Surface Area as:

&nbsp;

\(\text{Surface Area }= \displaystyle\int^\limits b_a2πydB\)

&nbsp;

\(dB=\sqrt{1+(\frac{dy}{dx})^2}\ dx\)

&nbsp;

Thus, by differentiating y with respect to x,

&nbsp;

\(\frac{dy}{dx}=0\)

&nbsp;

\(dB=\sqrt{1+(0)^2}dx\)

&nbsp;

\(∴Surface\ Area=\displaystyle\int\limits^{0.1}_02\pi(0x+0.85)(\sqrt{1+(0)^2}dx\)

&nbsp;

&there4; Surface Area &asymp; 0.5341

&nbsp;

I have used an online integration tool &ndash; Integral Calculator for the calculation of integrals:

Group 10.svg

Group 1.svg

From the graph, we find that the equation for the curve within the above-mentioned limits, i.e., from x&nbsp;= 0.1 to x = 7.31, is

&nbsp;

y = - 0.001x2&nbsp;- 0.019x + 0.55

&nbsp;

Thus by differentiating y with respect to x we get

&nbsp;

\(\frac{dy}{dx} = -0.002x - 0.019\)

&nbsp;

\(∴dB=\sqrt{1+(-0.002x-0.019)^2}dx\)

&nbsp;

\(\text{∴ Surface Area }=  \displaystyle\int\limits^{7.31}_{0.1}2\pi(-0.001x^2-0.019x+0.55)\)

&nbsp;

\((\sqrt{1+(-0.002x-0.019)^2}dx\)

&nbsp;

&there4; Surface Area &asymp; 20.91

&nbsp;

I have used an online integral calculator for calculating the integrals

Group 11.svg

pic 1.svg

From the graph, we find that the equation for the curve within the above-mentioned limits, i.e., from x = 7.31 to x = 7.43, is

&nbsp;

y = 0.18

&nbsp;

Thus by differentiating y with respect to x we get

&nbsp;

\(\frac{dy}{dx}=0\)

&nbsp;

\(∴dB=\sqrt{1+(0)^2}dx\)

&nbsp;

\(\text{∴ Surface Area }=  \displaystyle\int\limits^{7.43}_{7.31}2\pi(0.18)(1)dx\)

&nbsp;

&there4; Surface Area &asymp; 0.135

&nbsp;

I have used an online integral calculator for calculating the integrals

integration.svg

pic 2.svg

From the graph, we find that the equation for the curve within the above-mentioned limits, i.e., from x = 7.43 to x = 9.43, is

&nbsp;

y = 0.04

&nbsp;

Thus by differentiating y with respect to x we get

&nbsp;

\(\frac{dy}{dx}=0\)

&nbsp;

\(∴dB=\sqrt{1+(0)^2}dx\)

&nbsp;

\(∴Surface\ Area=\displaystyle\int\limits^{7.43}_{7.31}2\pi(0.04)(1)dx\)

&nbsp;

&there4; Surface Area &asymp; 0.502

&nbsp;

I have used an online integral calculator for calculating the integrals

pic 3.svg

Therefore, total surface area of this building = 0.534+20.91+0.135+0.502 = 22.081 sq. unit

&nbsp;

Height of John Hancock Building = 457 m

&nbsp;

Therefore, Total Surface Area&nbsp;=\( 22.081 × \frac{457}{9.43} = 1070.09\) sq. metre

Determination Of Optimized Shape Of Skyscrapers Considering The Cost Of Cleaning The Outer Wall Be Minimum.

ilan-grapel.png

Ilan Grapel

Tech & Law Grad Educator: Boost IB Math/CS Skills with Real-World Projects & Expertise!